Schematic   Simulation (Ngspice)

Tutorial: ngspice simulation (10)

I have written a short tutorial on how to set up ngspice simulation in Eeschema. It is available from the ngspice web pages at Comments and enhancements are welcome! …

About the Simulation (Ngspice) category (2)
AC motors simulation (1 phase & 3 phase) (4)
Could not find a valid modelname (2)
Equivalents for PSpice/Probe search commands (1)
Spice simulation of switch (2)
Too many parameters for subcircuit type: (12)
Stimulus file to create arbitrary wave shape input? (3)
Kicad ngspice github repository (17)
Diode simulates in reverse bias even though schematic shows it connected in forward bias (7)
More and more resources about simulation needed (4)
KiCad and Spice simulations (15)
Hierarchical Spice Netlists? (2)
Simulation on Mac OS (1)
Transformer Primary and secondary (5)
How to specify MOS transitor parameters like length and width? (3)
Tools→Simulator missing in the schematics editor window (4)
KiCad 5 Simulate BF862 NJF Parameter ignored ngspice (6)
How can I generate a .raw file for use in a 3rd party waveform viewer? ( 2 ) (22)
Adding spice components that do not exist in pspice library (5)
Simulation of circuit with power nodes (16)
Ngspice-28 for KiCad ( 2 ) (27)
Multiple sheet for simulations (6)
Simulation include directive (2)
Generating netlist for Ngspice in KiCad 5 (5)
Feed noise to high pass filter from CSV file (2)
Struggling with noise simulation (4)
Automatic plot after running simulation (1)
KiCAD netlist wrong wrt ngspice AD8001 (2)
Noise analysis in Kicad 5.0 MacOS (13)