Schematic Simulation (Ngspice)
Topic | Replies | Views | Activity | |
---|---|---|---|---|
Using ngspice in KiCad: Documentation
The simulator interface is described in the KiCad docs at The information source for ngspice is its User’s Manual: https://sourceforge.net/projects/ngspice/files/ng-spice-rework/44.2/ngspice-44-manual.pdf/download Wh… |
![]() ![]() |
1 | 194 | March 9, 2025 |
Introductory videos on simulation with ngspice in KiCad 8
I have made several introductory videos on simulation in addition to the tutorial at KiCad Eeschema as GUI for ngspice, tutorial for setting up the simulation Basic simulation Using an operational amplifie… |
![]() ![]() ![]() ![]() ![]() |
8 | 4084 | June 27, 2024 |
Simulation examples for KiCad8/KiCad9/Eeschema/ngspice
New simulation examples are following here. Up to Class E RF generator I have been using KiCad 8. Now I am switching to KiCad 9. It should be no problem to open KiCad 8 Eeschema files in KiCad 9 for simulation, as the s… |
![]() ![]() ![]() ![]() ![]() |
27 | 12019 | February 25, 2025 |
Simulation Mini FAQ
Please read this if you are new to Kicad Spice. ngspice users group because not all functionality is available through Kicad yet. https://sourceforge.net/p/ngspice/discussion/133842/ |
![]() |
3 | 1517 | January 1, 2025 |
About the Simulation (Ngspice) category
|
![]() ![]() |
1 | 1765 | June 11, 2018 |
Kicad 8 Noise Simultation Support
|
![]() ![]() |
2 | 136 | March 23, 2025 |
Can ngspice lose a space?
|
![]() |
0 | 79 | March 19, 2025 |
Can't find model error message
|
![]() |
1 | 95 | March 19, 2025 |
Valve/Tube Audio Amp KiCad v6 & v7 Schematics 05/24/23
|
![]() ![]() ![]() ![]() ![]() |
10 | 3958 | March 17, 2025 |
Ngspice is always right (KiCAD-ngspice transient analysis simulation debugging)
|
![]() ![]() ![]() |
4 | 601 | March 14, 2025 |
Measure RMS power?
|
![]() ![]() ![]() |
3 | 154 | March 13, 2025 |
I am confused about source types
|
![]() ![]() |
6 | 186 | March 11, 2025 |
Half voltage in +5v node
|
![]() ![]() ![]() |
5 | 171 | March 11, 2025 |
How to use Table in ideal comparator model
|
![]() ![]() ![]() |
5 | 190 | March 11, 2025 |
Set ngspice Model Type
|
![]() ![]() |
2 | 171 | March 10, 2025 |
Power Factor Measurement
|
![]() ![]() ![]() ![]() ![]() |
18 | 289 | March 10, 2025 |
Problems finding simulation models library
|
![]() ![]() |
4 | 164 | March 10, 2025 |
Ferrite Inductor symbol - One Core, trifilar wound
|
![]() ![]() ![]() ![]() ![]() |
18 | 317 | March 10, 2025 |
How to simulate switch without change overall schematic
|
![]() ![]() |
3 | 137 | March 7, 2025 |
Simulator Spontaneously Closes when ibis-test is Invoked
|
![]() ![]() |
2 | 141 | March 7, 2025 |
TL072dual lib
|
![]() ![]() ![]() |
5 | 142 | March 6, 2025 |
SPICE_LIB_DIR or model assignment problem
|
![]() |
0 | 101 | March 6, 2025 |
Pin assignements in a quad comparator are overwritten
|
![]() |
1 | 99 | March 5, 2025 |
Text blocks interfere with simulation instructions
|
![]() ![]() |
1 | 111 | March 4, 2025 |
TI AMC1200 PSPICE file incompatibility with KiCad
|
![]() ![]() |
2 | 157 | March 4, 2025 |
Setting up simulation parameters for built-in SPICE modes
|
![]() ![]() |
1 | 109 | March 3, 2025 |
Currents not shown in OP simulation
|
![]() ![]() |
2 | 156 | March 3, 2025 |
MMBTA64 model problem, can I use a pnp BJT model? How to boost (set) hf?
|
![]() ![]() |
4 | 126 | February 28, 2025 |
Simulation of TNY267
|
![]() ![]() ![]() ![]() ![]() |
11 | 194 | February 27, 2025 |
Attach spice models with symbol as built in model
|
![]() |
0 | 109 | February 27, 2025 |