Schematic


Simulation (Ngspice) Use this category for any discussions on the matter of circuit simulation with the inbuilt Ngspice module. Library Symbols This is about the library symbols. These are the abstract representation of parts that have pins in the schematic tool (eeschema). These are edited via the Library Editor. All things related to these symbols or creating them should go here. Association (CvPCB) This is about the actual association process. This is a sub category of the schematic category because from the 4.0 version onward, the CvPCB association tool is only available via the eeschema interface (Prior instances had a button for CvPCB in the launcher). If you are having software issues with installation or errors when loading this feature, <a href="https://forum.kicad.info/c/software">please post in the Software category</a>.
About the Schematic category [Schematic] (1)
Schematic format documented [Schematic] (5)
How do you add corners to clean up diagonal wires? [Schematic] (1)
When to write Chinese characters [Schematic] (13)
Delete selection with 'delete' key 5.0.2 - solved [Schematic] (3)
Colours in schematics [Schematic] (7)
Changed Pin Type in Library but Didn't Change Schematic? [Library Symbols] (7)
Scroll with Mouse wheel - Component library [Schematic] (3)
Spice simulation of switch [Simulation (Ngspice)] (2)
Search component between schematic and pcb [Schematic] (4)
Create pdf with link between same net [Schematic] (1)
Power Flags for Different Grounds and Supplies? [Library Symbols] (3)
Unable to find symbol for USB Connector in KiCAD or Digikey USB Connector libraries [Library Symbols] (7)
Too many parameters for subcircuit type: [Simulation (Ngspice)] (12)
Graphic lines in schematic [Schematic] (2)
Stimulus file to create arbitrary wave shape input? [Simulation (Ngspice)] (3)
PL_Editor Date Format [Schematic] (2)
Best practices: Pin-on-pin connection? Junctions dots? ( 2 3 ) [Schematic] (40)
Schematic Repositioning Components [Schematic] (2)
Can't save created symbol [Library Symbols] (10)
Modify Existing Symbol [Library Symbols] (6)
Create Component in KiCAD 5 [Library Symbols] (5)
Trouble With Duplicated Symbols [Library Symbols] (15)
How to copy error messages? [Schematic] (5)
How to Change the Reference Designator for a Type of Schematic Symbol? [Schematic] (4)
Appending components in Eeschema resets all annotations [Schematic] (19)
Kicad ngspice github repository [Simulation (Ngspice)] (17)
Why not included footprints for simple resistors [Library Symbols] (4)
Specifying a Library Symbol [Library Symbols] (8)
How +5V, +3.3V and GND work in hierarchiccal sheets? [Schematic] (4)