homer
July 17, 2024, 7:21pm
1
Hello
Is this display possible in Kicad?
You can set this in Altium.
I find it makes reading the circuit diagram much easier.
This subject has been around for awhile and I grew tired of waiting so, I made a Symbol for itā¦ symbol takes two-minutes to makeā¦
homer
July 17, 2024, 7:45pm
4
Thanks, nice idea but too time-consuming for me.
I understand and, given below image (showing the poll was posted in 2021), you may not have to wait much longer, perhaps only a few more years
For many years Iāve followed this simple rule: NO connections at crossed wires, ever.
1 Like
This was the subject of my very first post here
Hi,
Iām quite new to KiCad, Iāve created one PCB so far that was a copy of an existing PCB that we didnāt have the layout files for. Iāve got some schematic drawings to do, they arenāt PCBs but cabinet wiring diagrams, I thought I could use Eeschema.
My question: is it possible to get Eeschema to show not connected crossing wires with a ābridgeā rather than a flat crossed wire ? like this: http://www.ibiblio.org/kuphaldt/electricCircuits/Ref/01048.png
jmk
July 18, 2024, 9:17am
8
An interesting thought?
If wires A are inadvertently left on B after some Drag function has been used; the result is C.
If Hop-overs/Duck-unders were available and used, would the result of the A to B Drag be D?