Here’s a tip:
See the Blue comments in attached image. Thus, no need to
build the schematic in LTspice. Simply use the Netlist from Kicad…
EDIT: No need to paste the code if running LTspice from Kicad (as long as
you saved the Netlist as .CIR) 
Here’s a tip:
See the Blue comments in attached image. Thus, no need to
build the schematic in LTspice. Simply use the Netlist from Kicad…
EDIT: No need to paste the code if running LTspice from Kicad (as long as
you saved the Netlist as .CIR)
