Good morning everyone I’m desperately looking for schematic and photoprint for esp-32s with
15+15 PINS. Kindly can anyone help me. I’ve already seen all the answers on the forum, but I can’t find esp-32s with 30 pins. Thank you all.
I guess you are talking about a module here not a device ? you need to get the Symbol and Footprint from the manufacturer or better still make your own Symbol and Footprint.
Last year, I made this for an ESP-32 (30 pin) WROOM-32.
I detail my models enough to only satisfy my minimal needs (Models are for Graphics in Kicad nothing else).
If you can use the Footprint and STEP, it’s attached below. You can make your own Symbol and associate the Footprint to the Symbol (and associate the Step to the Footprint)…
There are plenty of Posts on how to do that…
UPDATE: I added Pads to the Footprint (and exchanged Photo).
ESP_Test.kicad_mod (5.8 KB)
There was an Upload error in the .ZIP - Hope this fixed it…
ESP_32_Compound.step.zip (787.1 KB)
