Push and shove seems to need small grid

[eelik]

Here’s one older discussion:

Track will not pass between pads as expected

Hi Community, I’m trying to connect the two nodes circled in red ink, please see below; [pic1]. It seems as though it should be a simple matter of threading my 10mils track (with 5 mils. clearance) between the 1mm pitched pads of the BGA. This poses no problem in the vertical direction (please see below); [pic2]. But when I try to thread it through in the southerly direction between pads H8 and J8, KiCad prevents me from doing so … it behaves as if pad H8 has some additional (seemingly hid…