I’m new to KiCad, so please bear with me!!
I’ve setup my schematic that connects pins of a 40 pin Raspberry Pi2 to a 8x2 MCP3008 IC.
In the schematic several green wires cross each other although they are not connected - is this correct? Or, should there be little bumps where the wires cross schematically but do not cross physically?
When I generate the PCB I have a white wire on the right hand side of the MCP3008 that is incorrectly connecting all 8 pins to each other.
The pins are not connected in the schematic and so I don’t understand why they are connected in the PCB.
Anyone see this before?
Thanks.