Kicad 6.0/W10 and Samac Sys library loader

Software
1

Hi, I recently went from Kicad 5 to Kicad 6 and when I try to use library loader I cannot see my schematic symbols?
image

I have tried migrate library to change the .lib file to the new format but I still cannot place schematic symbols I download from mouser.
Does Kicad 6 still work with library loader/samac sys?

2

Show us the library’s properties in Symbol Editor > Preferences > Manage Symbol Libraries.

manage-symbol-libraries
manage-symbol-libraries1000×300 29.8 KB

3

According to the SamacSys website, their product still works with KiCad6. I would check you have the latest version and run through the install instructions again.

4

Library’s properties:

image
image967×275 93.5 KB

5

And does that file contain any symbols? It’s a text file, you can view it with an editor.

And what about the original .lib file, did that contain symbols? Or is it a kind of virtual library that fetches from the Internet on demand? If that’s the case you may be better off setting up the library from instructions.

6

If you do a forum search for samacsys or library loader you will notice that people have had problems with it. See for example Schematic Symbols disappear all the time (KiCad unusable) to see a problem with disappearing libraries and a possible cause/explanation. You should try disabling the library loader and see if it helps.

As far as I know/have tested, the library loader just helps with the download phase. The library files are normal.

7

No the .kicad_sym does not appear to contain any symbols below

image
image1532×426 33.2 KB

But the lib file that was converted does contain new data everytime I load a part from mouser. Does this mean the migrate libraries button is not working?

8

If I use the legacy format Kicad 6 does not allow me to

image
image1084×701 171 KB

9

That’s probably why the migration failed, there is an error in the library.

Maybe it’s just one symbol. You could try this:

Backup the .lib file
Edit it with a text editor and go to line 192
Delete the whole symbol. It’s easy to find the symbol, it starts with DEF and ends with ENDDEF. And maybe the 3 line comment before it.
See if you can register it as a legacy library

Good luck.

10

Here is .lib file contents. I could not upload attachment

EESchema-LIBRARY Version 2.3
#encoding utf-8
#SamacSys ECAD Model NE555DR
#/6648/2/2.37/8/4/Integrated Circuit
DEF NE555DR IC 0 30 Y Y 1 F N
F0 "IC" 1050 600 50 H V L CNN
F1 "NE555DR" 1050 500 50 H V L CNN
F2 "SOIC127P600X175-8N" 1050 400 50 H I L CNN
F3 "http://www.ti.com/lit/ds/symlink/ne555.pdf" 1050 300 50 H I L CNN
F4 "Single Precision Timer" 1050 200 50 H I L CNN "Description"
F5 "1.75" 1050 100 50 H I L CNN "Height"
F6 "Texas Instruments" 1050 0 50 H I L CNN "Manufacturer_Name"
F7 "NE555DR" 1050 -100 50 H I L CNN "Manufacturer_Part_Number"
F8 "595-NE555DR" 1050 -200 50 H I L CNN "Mouser Part Number"
F9 "https://www.mouser.com/Search/Refine.aspx?Keyword=595-NE555DR" 1050 -300 50 H I L CNN "Mouser Price/Stock"
F10 "1218414" 1050 -400 50 H I L CNN "RS Part Number"
F11 "http//uk.rs-online.com/web/p/products/1218414" 1050 -500 50 H I L CNN "RS Price/Stock"
DRAW
X GND 1 600 -1000 200 U 50 50 0 0 B
X TRIG 2 0 -400 200 R 50 50 0 0 B
X OUT 3 1200 -200 200 L 50 50 0 0 B
X ~RESET 4 0 0 200 R 50 50 0 0 B
X CONT 5 500 600 200 D 50 50 0 0 B
X THRES 6 0 -300 200 R 50 50 0 0 B
X DISCH 7 0 -100 200 R 50 50 0 0 B
X VCC 8 700 600 200 D 50 50 0 0 B
P 5 0 1 6 200 400 1000 400 1000 -800 200 -800 200 400 N
ENDDRAW
ENDDEF
#
#SamacSys ECAD Model LM2678T-5.0_NOPB
#/331865/193250/2.44/7/3/Integrated Circuit
DEF LM2678T-5.0_NOPB IC 0 30 Y Y 1 F N
F0 "IC" 1550 300 50 H V L CNN
F1 "LM2678T-5.0_NOPB" 1550 200 50 H V L CNN
F2 "TO127P469X1022X2165-7P" 1550 100 50 H I L CNN
F3 "http://www.ti.com/lit/gpn/lm2678" 1550 0 50 H I L CNN
F4 "SIMPLE SWITCHER 8V to 40V, 5A High Efficiency Step-Down DC/DC Switching Regulator" 1550 -100 50 H I L CNN "Description"
F5 "4.69" 1550 -200 50 H I L CNN "Height"
F6 "926-LM2678T-5.0/NOPB" 1550 -300 50 H I L CNN "Mouser Part Number"
F7 "https://www.mouser.com/Search/Refine.aspx?Keyword=926-LM2678T-5.0%2FNOPB" 1550 -400 50 H I L CNN "Mouser Price/Stock"
F8 "Texas Instruments" 1550 -500 50 H I L CNN "Manufacturer_Name"
F9 "LM2678T-5.0/NOPB" 1550 -600 50 H I L CNN "Manufacturer_Part_Number"
DRAW
X SWITCH_OUTPUT 1 0 0 200 R 50 50 0 0 U
X INPUT 2 0 -100 200 R 50 50 0 0 U
X CB 3 0 -200 200 R 50 50 0 0 U
X GND 4 0 -300 200 R 50 50 0 0 U
X NC 5 1700 0 200 L 50 50 0 0 N
X FB 6 1700 -100 200 L 50 50 0 0 U
X ON/~OFF 7 1700 -200 200 L 50 50 0 0 U
P 5 0 1 6 200 100 1500 100 1500 -400 200 -400 200 100 N
ENDDRAW
ENDDEF
#
#SamacSys ECAD Model LTC3788EGN-1#PBF
#/663735/193250/2.44/28/3/Integrated Circuit
DEF LTC3788EGN-1#PBF IC 0 30 Y Y 1 F N
F0 "IC" 1350 300 50 H V L CNN
F1 "LTC3788EGN-1#PBF" 1350 200 50 H V L CNN
F2 "SOP64P601X175-28N" 1350 100 50 H I L CNN
F3 "https://componentsearchengine.com/Datasheets/1/LTC3788EGN-1#PBF.pdf" 1350 0 50 H I L CNN
F4 "Switching Voltage Regulators Dual 2-Phase Synchronous Boost Controller" 1350 -100 50 H I L CNN "Description"
F5 "1.75" 1350 -200 50 H I L CNN "Height"
F6 "584-LTC3788EGN-1#PBF" 1350 -300 50 H I L CNN "Mouser Part Number"
F7 "https://www.mouser.com/Search/Refine.aspx?Keyword=584-LTC3788EGN-1%23PBF" 1350 -400 50 H I L CNN "Mouser Price/Stock"
F8 "Linear Technology" 1350 -500 50 H I L CNN "Manufacturer_Name"
F9 "LTC3788EGN-1#PBF" 1350 -600 50 H I L CNN "Manufacturer_Part_Number"
DRAW
X ITH1 1 0 0 200 R 50 50 0 0 U
X VFB1 2 0 -100 200 R 50 50 0 0 U
X SENSE1+ 3 0 -200 200 R 50 50 0 0 U
X SENSE1- 4 0 -300 200 R 50 50 0 0 U
X FREQ 5 0 -400 200 R 50 50 0 0 U
X PLLIN/MODE 6 0 -500 200 R 50 50 0 0 U
X SGND 7 0 -600 200 R 50 50 0 0 U
X RUN1 8 0 -700 200 R 50 50 0 0 U
X RUN2 9 0 -800 200 R 50 50 0 0 U
X SENSE2- 10 0 -900 200 R 50 50 0 0 U
X SENSE2+ 11 0 -1000 200 R 50 50 0 0 U
X VFB2 12 0 -1100 200 R 50 50 0 0 U
X ITH2 13 0 -1200 200 R 50 50 0 0 U
X SS2 14 0 -1300 200 R 50 50 0 0 U
X SS1 28 1500 0 200 L 50 50 0 0 U
X PGOOD1 27 1500 -100 200 L 50 50 0 0 U
X SW1 26 1500 -200 200 L 50 50 0 0 U
X TG1 25 1500 -300 200 L 50 50 0 0 U
X BOOST1 24 1500 -400 200 L 50 50 0 0 U
X BG1 23 1500 -500 200 L 50 50 0 0 U
X VBIAS 22 1500 -600 200 L 50 50 0 0 U
X PGND 21 1500 -700 200 L 50 50 0 0 U
X EXTVCC 20 1500 -800 200 L 50 50 0 0 U
X INTVCC 19 1500 -900 200 L 50 50 0 0 U
X BG2 18 1500 -1000 200 L 50 50 0 0 U
X BOOST2 17 1500 -1100 200 L 50 50 0 0 U
X TG2 16 1500 -1200 200 L 50 50 0 0 U
X SW2 15 1500 -1300 200 L 50 50 0 0 U
P 5 0 1 6 200 100 1300 100 1300 -1400 200 -1400 200 100 N
ENDDRAW
ENDDEF
#
#SamacSys ECAD Model 6TQ045S
#/841149/193250/2.44/3/4/Schottky Diode
DEF 6TQ045S D 0 30 Y Y 1 F N
F0 "D" 1450 300 50 H V L CNN
F1 "6TQ045S" 1450 200 50 H V L CNN
F2 "3-PIND2PAK1" 1450 100 50 H I L CNN
F3 "https://componentsearchengine.com/Datasheets/1/6TQ045S.pdf" 1450 0 50 H I L CNN
F4 "Schottky Diodes & Rectifiers 6.0 Amp 45 Volt" 1450 -100 50 H I L CNN "Description"
F5 "" 1450 -200 50 H I L CNN "Height"
F6 "844-6TQ045S" 1450 -300 50 H I L CNN "Mouser Part Number"
F7 "https://www.mouser.com/Search/Refine.aspx?Keyword=844-6TQ045S" 1450 -400 50 H I L CNN "Mouser Price/Stock"
F8 "Vishay" 1450 -500 50 H I L CNN "Manufacturer_Name"
F9 "6TQ045S" 1450 -600 50 H I L CNN "Manufacturer_Part_Number"
DRAW
X N/C 1 0 0 200 R 50 50 0 0 N
X ANODE 3 0 -100 200 R 50 50 0 0 U
X BASE_CATHODE 4 1600 0 200 L 50 50 0 0 U
P 5 0 1 6 200 100 1400 100 1400 -200 200 -200 200 100 N
ENDDRAW
ENDDEF
#
#SamacSys ECAD Model T495X156K050ATE300
#/337150/193250/2.44/2/5/Capacitor Polarised
DEF T495X156K050ATE300 C 0 30 Y Y 1 F N
F0 "C" 350 250 50 H V L CNN
F1 "T495X156K050ATE300" 350 150 50 H V L CNN
F2 "CAPPM7343X310N" 350 50 50 H I L CNN
F3 "https://componentsearchengine.com/Datasheets/1/T495X156K050ATE300.pdf" 350 -50 50 H I L CNN
F4 "Kemet 15uF Solid MnO2 Tantalum Capacitor, 50 V dc +/-10%, T495 Series" 350 -150 50 H I L CNN "Description"
F5 "3.1" 350 -250 50 H I L CNN "Height"
F6 "80-T495X156K50ATE300" 350 -350 50 H I L CNN "Mouser Part Number"
F7 "https://www.mouser.com/Search/Refine.aspx?Keyword=80-T495X156K50ATE300" 350 -450 50 H I L CNN "Mouser Price/Stock"
F8 "Kemet" 350 -550 50 H I L CNN "Manufacturer_Name"
F9 "T495X156K050ATE300" 350 -650 50 H I L CNN "Manufacturer_Part_Number"
DRAW
X ~ 1 0 0 100 R 50 50 0 0 P
X ~ 2 500 0 100 L 50 50 0 0 P
P 5 0 1 6 200 100 200 -100 230 -100 230 100 200 100 N
P 2 0 1 6 180 50 140 50 N
P 2 0 1 6 160 70 160 30 N
P 2 0 1 6 100 0 200 0 N
P 2 0 1 6 300 0 400 0 N
P 5 0 1 10 300 100 300 -100 270 -100 270 100 300 100 F
ENDDRAW
ENDDEF
#
#SamacSys ECAD Model 594D187X9016R2T
#/2088328/193250/2.44/2/4/Capacitor Polarised
DEF 594D187X9016R2T C 0 30 Y Y 1 F N
F0 "C" 350 250 50 H V L CNN
F1 "594D187X9016R2T" 350 150 50 H V L CNN
F2 "594D187X9016R2T" 350 50 50 H I L CNN
F3 "https://componentsearchengine.com/Datasheets/1/594D187X9016R2T.pdf" 350 -50 50 H I L CNN
F4 "Cap Tant Solid 180uF 16V R CASE 10% (7.2 X 6 X 3.5mm) SMD 0.055 Ohm 125C T/R" 350 -150 50 H I L CNN "Description"
F5 "3.8" 350 -250 50 H I L CNN "Height"
F6 "74-594D187X9016R2T" 350 -350 50 H I L CNN "Mouser Part Number"
F7 "https://www.mouser.com/Search/Refine.aspx?Keyword=74-594D187X9016R2T" 350 -450 50 H I L CNN "Mouser Price/Stock"
F8 "Vishay" 350 -550 50 H I L CNN "Manufacturer_Name"
F9 "594D187X9016R2T" 350 -650 50 H I L CNN "Manufacturer_Part_Number"
DRAW
X ~ 1 0 0 100 R 50 50 0 0 P
X ~ 2 500 0 100 L 50 50 0 0 P
P 5 0 1 6 200 100 200 -100 230 -100 230 100 200 100 N
P 2 0 1 6 180 50 140 50 N
P 2 0 1 6 160 70 160 30 N
P 2 0 1 6 100 0 200 0 N
P 2 0 1 6 300 0 400 0 N
P 5 0 1 10 300 100 300 -100 270 -100 270 100 300 100 F
ENDDRAW
ENDDEF
#
#SamacSys ECAD Model MSP430F5132IDA
#/287325/193250/2.44/38/3/Integrated Circuit
DEF MSP430F5132IDA IC 0 30 Y Y 1 F N
F0 "IC" 3650 300 50 H V L CNN
F1 "MSP430F5132IDA" 3650 200 50 H V L CNN
F2 "SOP65P810X120-38N" 3650 100 50 H I L CNN
F3 "" 3650 0 50 H I L CNN
F4 "Mixed Signal Microcontroller 8K TSSOP38 Texas Instruments MSP430F5132IDA, 16bit MSP430 Microcontroller, 25MHz, 8 kB Flash, 38-Pin TSSOP" 3650 -100 50 H I L CNN "Description"
F5 "1.2" 3650 -200 50 H I L CNN "Height"
F6 "595-MSP430F5132IDA" 3650 -300 50 H I L CNN "Mouser Part Number"
F7 "https://www.mouser.com/Search/Refine.aspx?Keyword=595-MSP430F5132IDA" 3650 -400 50 H I L CNN "Mouser Price/Stock"
F8 "Texas Instruments" 3650 -500 50 H I L CNN "Manufacturer_Name"
F9 "MSP430F5132IDA" 3650 -600 50 H I L CNN "Manufacturer_Part_Number"
DRAW
X AVCC 1 0 0 200 R 50 50 0 0 W
X PJ.4/XOUT 2 0 -100 200 R 50 50 0 0 O
X PJ.5/XIN 3 0 -200 200 R 50 50 0 0 I
X AVSS 4 0 -300 200 R 50 50 0 0 W
X P1.0/PM__/PM_UCB0STE/A0/CB0 5 0 -400 200 R 50 50 0 0 U
X P1.1/PM_UCA0TXD/PM_UCA0SIMO/A1~\~/CB1  0 -500 200 R 50 50 0 0 U
X P1.2/PM_UCA0RXD/PM_UCA0SOMI/A2~\~/CB2  0 -600 200 R 50 50 0 0 U
X P1.3/PM_UCB0CLK/PM_UCA0STE/A3~\~/CB3  0 -700 200 R 50 50 0 0 I
X P1.4/PM_UCB0SIMO/PM_UCB0SDA/A4~\~/CB4  0 -800 200 R 50 50 0 0 U
X P1.5/PM_UCB0SOMI/PM_UCB0SCL/A5~\~/CB5  0 -900 200 R 50 50 0 0 U
X PJ.0/SMCLK/TDO/CB6 11 0 -1000 200 R 50 50 0 0 I
X PJ.1/MCLK/TDI/TCLK/CB7 12 0 -1100 200 R 50 50 0 0 I
X PJ.2/ADC10CLK/TMS/CB8 13 0 -1200 200 R 50 50 0 0 I
X PJ.3/ACLK/TCK/CB9 14 0 -1300 200 R 50 50 0 0 I
X P1.6/_TD0.0 15 0 -1400 200 R 50 50 0 0 U
X P1.7/_TD0.1 16 0 -1500 200 R 50 50 0 0 U
X P2.0/_TD0.2 17 0 -1600 200 R 50 50 0 0 U
X P2.1/P_TD1.0 18 0 -1700 200 R 50 50 0 0 U
X P2.2/_TD1.1 19 0 -1800 200 R 50 50 0 0 U
X P3.6/_TA0.1/A7/VEREF-/CB11 38 3800 -1800 200 L 50 50 0 0 I
X P3.5/_TA0.2/A8/VEREF+/CB12 37 3800 -1700 200 L 50 50 0 0 I
X ~RST~/NMI/SBWTDIO 36 3800 -1600 200 L 50 50 0 0 B
X TEST/SBWTCK 35 3800 -1500 200 L 50 50 0 0 U
X P3.3/_TA0CLK/_CBOUT/CB13 34 3800 -1400 200 L 50 50 0 0 O
X P3.2/_TD0.0/_SMCLK/CB14 33 3800 -1300 200 L 50 50 0 0 I
X PJ.6/TD1CLK/TD0.1/CB15 32 3800 -1200 200 L 50 50 0 0 I
X DVCC 31 3800 -1100 200 L 50 50 0 0 W
X DVSS_2 30 3800 -1000 200 L 50 50 0 0 W
X VCORE 29 3800 -900 200 L 50 50 0 0 U
X P3.1/_TEC1FLT0/_TD1.2 28 3800 -800 200 L 50 50 0 0 U
X P3.0/_TEC1FLT2/_TD1.1 27 3800 -700 200 L 50 50 0 0 U
X P2.7/_TEC1CLR/_TD1.0 26 3800 -600 200 L 50 50 0 0 U
X P2.6/_TD0.2 25 3800 -500 200 L 50 50 0 0 U
X P2.5_TD0.1 24 3800 -400 200 L 50 50 0 0 U
X P2.4/_TEC0CLR_/_TD0.0 23 3800 -300 200 L 50 50 0 0 U
X DVSS_1 22 3800 -200 200 L 50 50 0 0 W
X DVIO 21 3800 -100 200 L 50 50 0 0 B
X P2.3/_TD1.2 20 3800 0 200 L 50 50 0 0 U
P 5 0 1 6 200 100 3600 100 3600 -1900 200 -1900 200 100 N
ENDDRAW
ENDDEF
#
#SamacSys ECAD Model BAT-HLD-001
#/577251/193250/2.49/3/4/Undefined or Miscellaneous
DEF BAT-HLD-001 U 0 30 Y Y 1 F N
F0 "U" 650 300 50 H V L CNN
F1 "BAT-HLD-001" 650 200 50 H V L CNN
F2 "BATHLD001" 650 100 50 H I L CNN
F3 "" 650 0 50 H I L CNN
F4 "Coin Cell Battery Holders Linx CR2032 Battery Holder" 650 -100 50 H I L CNN "Description"
F5 "4" 650 -200 50 H I L CNN "Height"
F6 "712-BAT-HLD-001" 650 -300 50 H I L CNN "Mouser Part Number"
F7 "https://www.mouser.co.uk/ProductDetail/Linx-Technologies/BAT-HLD-001?qs=K5ta8V%252BWhta7hbVGfm4dqA%3D%3D" 650 -400 50 H I L CNN "Mouser Price/Stock"
F8 "Linx Technologies" 650 -500 50 H I L CNN "Manufacturer_Name"
F9 "BAT-HLD-001" 650 -600 50 H I L CNN "Manufacturer_Part_Number"
DRAW
X 1 1 0 -200 200 R 50 50 0 0 P
X 2 2 0 0 200 R 50 50 0 0 P
X 3 3 0 -100 200 R 50 50 0 0 P
P 5 0 1 6 200 100 600 100 600 -300 200 -300 200 100 N
ENDDRAW
ENDDEF
#
#SamacSys ECAD Model TC33X-2-103G
#/1281091/193250/2.49/3/4/Variable Resistor
DEF TC33X-2-103G VR 0 30 Y Y 1 F N
F0 "VR" 950 300 50 H V L CNN
F1 "TC33X-2-103G" 950 200 50 H V L CNN
F2 "TC33X2503E" 950 100 50 H I L CNN
F3 "https://www.bourns.com/pdfs/TC33.pdf" 950 0 50 H I L CNN
F4 "Trimmer Resistors - SMD 3MM 10KOHMS 25% 0.1WATT OPEN FRM" 950 -100 50 H I L CNN "Description"
F5 "1.2" 950 -200 50 H I L CNN "Height"
F6 "652-TC33X-2-103G" 950 -300 50 H I L CNN "Mouser Part Number"
F7 "https://www.mouser.co.uk/ProductDetail/Bourns/TC33X-2-103G?qs=fmZCN1JtwVGHgHrSUcsPzA%3D%3D" 950 -400 50 H I L CNN "Mouser Price/Stock"
F8 "Bourns" 950 -500 50 H I L CNN "Manufacturer_Name"
F9 "TC33X-2-103G" 950 -600 50 H I L CNN "Manufacturer_Part_Number"
DRAW
X CCW 1 0 0 200 R 50 50 0 0 P
X WIPER 2 1100 0 200 L 50 50 0 0 P
X CW 3 0 -100 200 R 50 50 0 0 P
P 5 0 1 6 200 100 900 100 900 -200 200 -200 200 100 N
ENDDRAW
ENDDEF
#
#End Library
11

Why should it be line 192?

12

That’s the line the error message mentioned in your screenshot.

13

Ok I can place from the lib file now that I removed the MSP430 symbol! thanks for your help

EESchema-LIBRARY Version 2.3
#encoding utf-8
#SamacSys ECAD Model NE555DR
#/6648/2/2.37/8/4/Integrated Circuit
DEF NE555DR IC 0 30 Y Y 1 F N
F0 "IC" 1050 600 50 H V L CNN
F1 "NE555DR" 1050 500 50 H V L CNN
F2 "SOIC127P600X175-8N" 1050 400 50 H I L CNN
F3 "http://www.ti.com/lit/ds/symlink/ne555.pdf" 1050 300 50 H I L CNN
F4 "Single Precision Timer" 1050 200 50 H I L CNN "Description"
F5 "1.75" 1050 100 50 H I L CNN "Height"
F6 "Texas Instruments" 1050 0 50 H I L CNN "Manufacturer_Name"
F7 "NE555DR" 1050 -100 50 H I L CNN "Manufacturer_Part_Number"
F8 "595-NE555DR" 1050 -200 50 H I L CNN "Mouser Part Number"
F9 "https://www.mouser.com/Search/Refine.aspx?Keyword=595-NE555DR" 1050 -300 50 H I L CNN "Mouser Price/Stock"
F10 "1218414" 1050 -400 50 H I L CNN "RS Part Number"
F11 "http//uk.rs-online.com/web/p/products/1218414" 1050 -500 50 H I L CNN "RS Price/Stock"
DRAW
X GND 1 600 -1000 200 U 50 50 0 0 B
X TRIG 2 0 -400 200 R 50 50 0 0 B
X OUT 3 1200 -200 200 L 50 50 0 0 B
X ~RESET 4 0 0 200 R 50 50 0 0 B
X CONT 5 500 600 200 D 50 50 0 0 B
X THRES 6 0 -300 200 R 50 50 0 0 B
X DISCH 7 0 -100 200 R 50 50 0 0 B
X VCC 8 700 600 200 D 50 50 0 0 B
P 5 0 1 6 200 400 1000 400 1000 -800 200 -800 200 400 N
ENDDRAW
ENDDEF
#
#SamacSys ECAD Model LM2678T-5.0_NOPB
#/331865/193250/2.44/7/3/Integrated Circuit
DEF LM2678T-5.0_NOPB IC 0 30 Y Y 1 F N
F0 "IC" 1550 300 50 H V L CNN
F1 "LM2678T-5.0_NOPB" 1550 200 50 H V L CNN
F2 "TO127P469X1022X2165-7P" 1550 100 50 H I L CNN
F3 "http://www.ti.com/lit/gpn/lm2678" 1550 0 50 H I L CNN
F4 "SIMPLE SWITCHER 8V to 40V, 5A High Efficiency Step-Down DC/DC Switching Regulator" 1550 -100 50 H I L CNN "Description"
F5 "4.69" 1550 -200 50 H I L CNN "Height"
F6 "926-LM2678T-5.0/NOPB" 1550 -300 50 H I L CNN "Mouser Part Number"
F7 "https://www.mouser.com/Search/Refine.aspx?Keyword=926-LM2678T-5.0%2FNOPB" 1550 -400 50 H I L CNN "Mouser Price/Stock"
F8 "Texas Instruments" 1550 -500 50 H I L CNN "Manufacturer_Name"
F9 "LM2678T-5.0/NOPB" 1550 -600 50 H I L CNN "Manufacturer_Part_Number"
DRAW
X SWITCH_OUTPUT 1 0 0 200 R 50 50 0 0 U
X INPUT 2 0 -100 200 R 50 50 0 0 U
X CB 3 0 -200 200 R 50 50 0 0 U
X GND 4 0 -300 200 R 50 50 0 0 U
X NC 5 1700 0 200 L 50 50 0 0 N
X FB 6 1700 -100 200 L 50 50 0 0 U
X ON/~OFF 7 1700 -200 200 L 50 50 0 0 U
P 5 0 1 6 200 100 1500 100 1500 -400 200 -400 200 100 N
ENDDRAW
ENDDEF
#
#SamacSys ECAD Model LTC3788EGN-1#PBF
#/663735/193250/2.44/28/3/Integrated Circuit
DEF LTC3788EGN-1#PBF IC 0 30 Y Y 1 F N
F0 "IC" 1350 300 50 H V L CNN
F1 "LTC3788EGN-1#PBF" 1350 200 50 H V L CNN
F2 "SOP64P601X175-28N" 1350 100 50 H I L CNN
F3 "https://componentsearchengine.com/Datasheets/1/LTC3788EGN-1#PBF.pdf" 1350 0 50 H I L CNN
F4 "Switching Voltage Regulators Dual 2-Phase Synchronous Boost Controller" 1350 -100 50 H I L CNN "Description"
F5 "1.75" 1350 -200 50 H I L CNN "Height"
F6 "584-LTC3788EGN-1#PBF" 1350 -300 50 H I L CNN "Mouser Part Number"
F7 "https://www.mouser.com/Search/Refine.aspx?Keyword=584-LTC3788EGN-1%23PBF" 1350 -400 50 H I L CNN "Mouser Price/Stock"
F8 "Linear Technology" 1350 -500 50 H I L CNN "Manufacturer_Name"
F9 "LTC3788EGN-1#PBF" 1350 -600 50 H I L CNN "Manufacturer_Part_Number"
DRAW
X ITH1 1 0 0 200 R 50 50 0 0 U
X VFB1 2 0 -100 200 R 50 50 0 0 U
X SENSE1+ 3 0 -200 200 R 50 50 0 0 U
X SENSE1- 4 0 -300 200 R 50 50 0 0 U
X FREQ 5 0 -400 200 R 50 50 0 0 U
X PLLIN/MODE 6 0 -500 200 R 50 50 0 0 U
X SGND 7 0 -600 200 R 50 50 0 0 U
X RUN1 8 0 -700 200 R 50 50 0 0 U
X RUN2 9 0 -800 200 R 50 50 0 0 U
X SENSE2- 10 0 -900 200 R 50 50 0 0 U
X SENSE2+ 11 0 -1000 200 R 50 50 0 0 U
X VFB2 12 0 -1100 200 R 50 50 0 0 U
X ITH2 13 0 -1200 200 R 50 50 0 0 U
X SS2 14 0 -1300 200 R 50 50 0 0 U
X SS1 28 1500 0 200 L 50 50 0 0 U
X PGOOD1 27 1500 -100 200 L 50 50 0 0 U
X SW1 26 1500 -200 200 L 50 50 0 0 U
X TG1 25 1500 -300 200 L 50 50 0 0 U
X BOOST1 24 1500 -400 200 L 50 50 0 0 U
X BG1 23 1500 -500 200 L 50 50 0 0 U
X VBIAS 22 1500 -600 200 L 50 50 0 0 U
X PGND 21 1500 -700 200 L 50 50 0 0 U
X EXTVCC 20 1500 -800 200 L 50 50 0 0 U
X INTVCC 19 1500 -900 200 L 50 50 0 0 U
X BG2 18 1500 -1000 200 L 50 50 0 0 U
X BOOST2 17 1500 -1100 200 L 50 50 0 0 U
X TG2 16 1500 -1200 200 L 50 50 0 0 U
X SW2 15 1500 -1300 200 L 50 50 0 0 U
P 5 0 1 6 200 100 1300 100 1300 -1400 200 -1400 200 100 N
ENDDRAW
ENDDEF
#
#SamacSys ECAD Model 6TQ045S
#/841149/193250/2.44/3/4/Schottky Diode
DEF 6TQ045S D 0 30 Y Y 1 F N
F0 "D" 1450 300 50 H V L CNN
F1 "6TQ045S" 1450 200 50 H V L CNN
F2 "3-PIND2PAK1" 1450 100 50 H I L CNN
F3 "https://componentsearchengine.com/Datasheets/1/6TQ045S.pdf" 1450 0 50 H I L CNN
F4 "Schottky Diodes & Rectifiers 6.0 Amp 45 Volt" 1450 -100 50 H I L CNN "Description"
F5 "" 1450 -200 50 H I L CNN "Height"
F6 "844-6TQ045S" 1450 -300 50 H I L CNN "Mouser Part Number"
F7 "https://www.mouser.com/Search/Refine.aspx?Keyword=844-6TQ045S" 1450 -400 50 H I L CNN "Mouser Price/Stock"
F8 "Vishay" 1450 -500 50 H I L CNN "Manufacturer_Name"
F9 "6TQ045S" 1450 -600 50 H I L CNN "Manufacturer_Part_Number"
DRAW
X N/C 1 0 0 200 R 50 50 0 0 N
X ANODE 3 0 -100 200 R 50 50 0 0 U
X BASE_CATHODE 4 1600 0 200 L 50 50 0 0 U
P 5 0 1 6 200 100 1400 100 1400 -200 200 -200 200 100 N
ENDDRAW
ENDDEF
#
#SamacSys ECAD Model T495X156K050ATE300
#/337150/193250/2.44/2/5/Capacitor Polarised
DEF T495X156K050ATE300 C 0 30 Y Y 1 F N
F0 "C" 350 250 50 H V L CNN
F1 "T495X156K050ATE300" 350 150 50 H V L CNN
F2 "CAPPM7343X310N" 350 50 50 H I L CNN
F3 "https://componentsearchengine.com/Datasheets/1/T495X156K050ATE300.pdf" 350 -50 50 H I L CNN
F4 "Kemet 15uF Solid MnO2 Tantalum Capacitor, 50 V dc +/-10%, T495 Series" 350 -150 50 H I L CNN "Description"
F5 "3.1" 350 -250 50 H I L CNN "Height"
F6 "80-T495X156K50ATE300" 350 -350 50 H I L CNN "Mouser Part Number"
F7 "https://www.mouser.com/Search/Refine.aspx?Keyword=80-T495X156K50ATE300" 350 -450 50 H I L CNN "Mouser Price/Stock"
F8 "Kemet" 350 -550 50 H I L CNN "Manufacturer_Name"
F9 "T495X156K050ATE300" 350 -650 50 H I L CNN "Manufacturer_Part_Number"
DRAW
X ~ 1 0 0 100 R 50 50 0 0 P
X ~ 2 500 0 100 L 50 50 0 0 P
P 5 0 1 6 200 100 200 -100 230 -100 230 100 200 100 N
P 2 0 1 6 180 50 140 50 N
P 2 0 1 6 160 70 160 30 N
P 2 0 1 6 100 0 200 0 N
P 2 0 1 6 300 0 400 0 N
P 5 0 1 10 300 100 300 -100 270 -100 270 100 300 100 F
ENDDRAW
ENDDEF
#
#SamacSys ECAD Model 594D187X9016R2T
#/2088328/193250/2.44/2/4/Capacitor Polarised
DEF 594D187X9016R2T C 0 30 Y Y 1 F N
F0 "C" 350 250 50 H V L CNN
F1 "594D187X9016R2T" 350 150 50 H V L CNN
F2 "594D187X9016R2T" 350 50 50 H I L CNN
F3 "https://componentsearchengine.com/Datasheets/1/594D187X9016R2T.pdf" 350 -50 50 H I L CNN
F4 "Cap Tant Solid 180uF 16V R CASE 10% (7.2 X 6 X 3.5mm) SMD 0.055 Ohm 125C T/R" 350 -150 50 H I L CNN "Description"
F5 "3.8" 350 -250 50 H I L CNN "Height"
F6 "74-594D187X9016R2T" 350 -350 50 H I L CNN "Mouser Part Number"
F7 "https://www.mouser.com/Search/Refine.aspx?Keyword=74-594D187X9016R2T" 350 -450 50 H I L CNN "Mouser Price/Stock"
F8 "Vishay" 350 -550 50 H I L CNN "Manufacturer_Name"
F9 "594D187X9016R2T" 350 -650 50 H I L CNN "Manufacturer_Part_Number"
DRAW
X ~ 1 0 0 100 R 50 50 0 0 P
X ~ 2 500 0 100 L 50 50 0 0 P
P 5 0 1 6 200 100 200 -100 230 -100 230 100 200 100 N
P 2 0 1 6 180 50 140 50 N
P 2 0 1 6 160 70 160 30 N
P 2 0 1 6 100 0 200 0 N
P 2 0 1 6 300 0 400 0 N
P 5 0 1 10 300 100 300 -100 270 -100 270 100 300 100 F
ENDDRAW
ENDDEF
#
#SamacSys ECAD Model BAT-HLD-001
#/577251/193250/2.49/3/4/Undefined or Miscellaneous
DEF BAT-HLD-001 U 0 30 Y Y 1 F N
F0 "U" 650 300 50 H V L CNN
F1 "BAT-HLD-001" 650 200 50 H V L CNN
F2 "BATHLD001" 650 100 50 H I L CNN
F3 "" 650 0 50 H I L CNN
F4 "Coin Cell Battery Holders Linx CR2032 Battery Holder" 650 -100 50 H I L CNN "Description"
F5 "4" 650 -200 50 H I L CNN "Height"
F6 "712-BAT-HLD-001" 650 -300 50 H I L CNN "Mouser Part Number"
F7 "https://www.mouser.co.uk/ProductDetail/Linx-Technologies/BAT-HLD-001?qs=K5ta8V%252BWhta7hbVGfm4dqA%3D%3D" 650 -400 50 H I L CNN "Mouser Price/Stock"
F8 "Linx Technologies" 650 -500 50 H I L CNN "Manufacturer_Name"
F9 "BAT-HLD-001" 650 -600 50 H I L CNN "Manufacturer_Part_Number"
DRAW
X 1 1 0 -200 200 R 50 50 0 0 P
X 2 2 0 0 200 R 50 50 0 0 P
X 3 3 0 -100 200 R 50 50 0 0 P
P 5 0 1 6 200 100 600 100 600 -300 200 -300 200 100 N
ENDDRAW
ENDDEF
#
#SamacSys ECAD Model TC33X-2-103G
#/1281091/193250/2.49/3/4/Variable Resistor
DEF TC33X-2-103G VR 0 30 Y Y 1 F N
F0 "VR" 950 300 50 H V L CNN
F1 "TC33X-2-103G" 950 200 50 H V L CNN
F2 "TC33X2503E" 950 100 50 H I L CNN
F3 "https://www.bourns.com/pdfs/TC33.pdf" 950 0 50 H I L CNN
F4 "Trimmer Resistors - SMD 3MM 10KOHMS 25% 0.1WATT OPEN FRM" 950 -100 50 H I L CNN "Description"
F5 "1.2" 950 -200 50 H I L CNN "Height"
F6 "652-TC33X-2-103G" 950 -300 50 H I L CNN "Mouser Part Number"
F7 "https://www.mouser.co.uk/ProductDetail/Bourns/TC33X-2-103G?qs=fmZCN1JtwVGHgHrSUcsPzA%3D%3D" 950 -400 50 H I L CNN "Mouser Price/Stock"
F8 "Bourns" 950 -500 50 H I L CNN "Manufacturer_Name"
F9 "TC33X-2-103G" 950 -600 50 H I L CNN "Manufacturer_Part_Number"
DRAW
X CCW 1 0 0 200 R 50 50 0 0 P
X WIPER 2 1100 0 200 L 50 50 0 0 P
X CW 3 0 -100 200 R 50 50 0 0 P
P 5 0 1 6 200 100 900 100 900 -200 200 -200 200 100 N
ENDDRAW
ENDDEF
#
#End Library
14

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.