Can anyone tell me if I’ve done something silly or wrong here. i was attempting to create a mic preamp and with a little gain control and a Squelch circuit to pair with some little 1W amps i have to drive some gaming headphone in a closed loop com box situation. where the two headsets talk back and forth. this is the schematic I’ve come up with. looking for thoughts on it
This forum is for discussing the use of The Kicad programme. It seems the schematic shown is not Kicad.
And even if were drawn in KiCad, this forum is not for discussing circuit design. There are other forums for that, e.g. EEVBlog.