Footprint for 13 pin DIN connector?

Layout
1

Hi guys

I have a project coming up where I’ll need to use DIN13 connectors, something like this (link to image from eBay listing for one) or this (link to digikey datasheet). I’ve not seen a KiCad footprint for these so thought it was worth asking in case I can avoid creating it from scratch.

Thanks
Geoff

2

Take a look here http://smisioto.no-ip.org/elettronica/kicad/kicad-en.htm.

Scroll down to the A/V connectors library. There is a Din Socket with foot print and 3d model in Walter’s library

Andy

1 Like
3

wow, impressive library!

4

Hi Andy

I see a 5 pin DIN and an 8 pin mini-DIN but no 13 pin DIN there?

@Dolganoff totally agree. That collection is amazing.

Geoff

5

If you like, I’ll have a go at creating the foot print and 3d model for you. I’ve printed off the part of the PDF that gives the details for the 13 pin socket so it shouldn’t be too hard. I think lol

Andy

6

@Andy_Podmore that would be nothing short of brilliant, thanks so much!

7

Hi, how did this ended up_ I also am in dire need of the footprint for 13 pin DIN socket