DRC does not detect missing tracks

[kesara_malinda]

Hi ,
Can anyone explain why missing track 3.3v to pin header in here is not detected through DRC ?
Pls note that I didn’t change DRC settings and settings are default.

[retiredfeline]

It should be. The ratsnest line indicates that the connection has not been made. Did you check under the Unconnected Items tab in the DRC window? Post a screenshot of that.

[Piotr]

I suppose it would help if you could attach a project (File-Archive Project in main KiCad window).
For how to get permission for it read:

New Member Information

The Kicad Forum uses the Discourse program to operate. To understand this system, please read the information in this link: https://blog.discourse.org/2018/06/understanding-discourse-trust-levels/ As a new user (Level 0 - New), there are many restrictions, among which are: Only one image may be posted No attachments may be posted. To post multiple images and/or attachments, the new member needs to achieve (Level 1 - Basic). Level 1 is achieved by opening and reading at least Thirty differe…

[kesara_malinda]

Thanks for the tip .I will attach the project

[kesara_malinda]

It shows under the "Unconnected Items " tab. Thanks you for pointing that out.
Thanks for the help.

[davidsrsb]

Yes, it’s a separate tab these days.
Unchecking the"errors" tick box also would hide this