Adding relay in the design

[SAKSHI_Mehra]

so im working on a design, in which i want to use a 5 pin realy with the connector and an eswitch such that when anything happens to the system the relay cuts off the supply any reference schematic available or any guidance in this.

Please help

[retiredfeline]

Please read this New Member Information:

New Member Information

Welcome new member. The purpose of the Kicad Info. forum is to discuss ideas, make remarks and ask questions related to the use of Kicad. This Kicad forum is not for questions regarding general electronic design. Basic information on using Kicad can be found at Getting started in Kicad Comprehensive information is at https://docs.kicad.org/ and specialised subjects are covered in the FAQs below. This is an English language forum. Please use a translator for non English posts. This Kicad For…

in particular the first main paragraph.

[tama]

@SAKSHI_Mehra

so im working on a design, in which i want to use a 5 pin realy with the connector and an eswitch such that when anything happens to the system the relay cuts off the supply any reference schematic available or any guidance in this.

For long sentences, why not try asking the AI below first?

• Copilot https://copilot.microsoft.com/
• Chatgpt https://openai.com/
• Gemini https://gemini.google.com/ etc.etc…
  ex.
  

Knowing how to use tools and how to design the finished product are two different fields, so it might be a good idea to find other forums where people discuss circuit construction. (Maybe you could ask an AI where the forum is.)

It may also be useful to look at the datasheets of the parts you plan to use.