Zone Filled with 3.3V (Purple) Still Shows as Unconnected in DRC

I’m facing an issue in my PCB layout using KiCad. I’ve created a copper zone for the 3.3V net, and it’s showing up in purple (based on my color settings). The zone appears to be properly filled, and I’ve double-checked that the net is set to 3.3V.

However, when I run the DRC, it shows “Unconnected items” for the 3.3V net. I expected the zone to connect everything, but something seems off.


image

Does anyone know what might be causing this? Any help would be greatly appreciated

Please read for example (Wrong?) error: Missing connection between items, it may be the same problem. If not, describe your situation more accurately.