Thank you,
You was correct 
Another question. On your last update there is an error when I use different paths for 3d parts. I have common 3d files on /usr/share/kicad/packages3d and other 3d parts on my project folder.
I have changed the prefix3d_1 path to /home/ze/ on ksu-config.ini otherway it can’t export the wrl and step file into the kicad folder because it need permissions and after change it to home/ze I start getting the following:
/home/ze/Capacitors_SMD.3dshapes/C_0603.step
/home/ze/Resistors_SMD.3dshapes/R_0603.step
/home/ze/Housings_QFP.3dshapes/LQFP-64_10x10mm_Pitch0.5mm.step
/home/ze/TO_SOT_Packages_SMD.3dshapes/SOT23-6.step
/home/ze/TO_SOT_Packages_SMD.3dshapes/SOT23-5_wLABEL.step
/home/ze/Socket_Strips.3dshapes/Socket_Strip_Straight_1x03.step
/home/ze/LEDs.3dshapes/LED_0805.step
/home/ze/shapes3D/022053021.step
/home/ze/Pin_Headers.3dshapes/Pin_Header_Straight_1x05.step
/home/ze/shapes3D/S6B-XH-A.step
/home/ze/shapes3D/Pololu_DRV8801.step
/home/ze/shapes3D/B2B-XH-A.step
/home/ze/shapes3D/1050171001.step