ESP32-DEV-CH340-C Symbol and footprint

[teletypeguy]

Advise one choosing components

When I do a module, I make two components: The socket and the actual module. The socket has the main schematic symbol with all the pins, and has a 3d model with the socket(s). If it is a single sip socket it is easy enough, if it has a couple of sip sockets I build it in freecad. The module symbol for the schematic is just a little box, and the footprint is also just a box (on user drawings layer, not on silk) the size of the module. The 3d model is the actual module, elevated in z to the l…