Cannot import DXF file

[Rene_Poschl]

You might want to look at your export settings in autocad and play around a bit.
Here some older topic with a similar question.

DXF import from footprint editor doesn't work

When I try to import a DXF file into the footprint editor, I get graphics of a 3 position terminal block, and a circle - neither of these are part of anything that I’ve drawn. There is only 1 dxf file on my computer, and I have verified what it looks like by using an online dxf viewer. Previously, I was using version 4.0.4, so I upgraded to 4.0.5, and the problem persists. The dxf file came from VISIO, line color orange. I’ve tried importing it to different layers, and the odd graphics move to t…

Import DXF with arcs from OpenSCAD, FreeCAD or LibreCAD into KiCAD

Is it just me or KiCad->Import->DXF will approximate arcs in Edge.Cuts as straight lines? See the FreeCAD cutout and its corresponding DXF export in KiCad’s Pcbnew (bottom arcs on the left and right sides are lines in KiCad import): [image][image]