Some posts were split off so I’ll move actual model I created here.
@Sprig
Here you go, 3034 holder models
BatteryHolder_Keystone_3034_1x20mm.step (209.0 KB)
BatteryHolder_Keystone_3034_1x20mm.wrl (95.2 KB)
@maui here’s freecad file BatteryHolder_Keystone_3034_1x20mm.FCStd (314.6 KB)
I made the model by creating base sketch of the top face of the holder. Importing an image from datasheet was useful to overlay to get geometry of the sketch right. Then it’s just few bends using metal sheet workbench and some fillets.
I’ll make 7 segment display model later this week unless someone beats me to it.