3D model appear on footprint editor and not on the PCB

Layout 3D Models
1

Hello everyone,
Currently, I search to have 3D model of existing PCB, so I took an existing schematic and PCB but it don’t have the 3D model of the component on the 3D Viewer. So I added on the Footprint Editor → Footprint Properties → 3D Models a 3D model of my component like we can see on this picture:

image
image831×725 46.4 KB

But when I looked at the 3D viewer the model doesn’t appear.
image
image689×546 103 KB

From what I have seen online it was say that it can be because of the default Pad Properties for add pad tool wasn’t on Pad type SMD so I have made the edit or it can also be because of the coordinate but when I tested the model on the footprint properties or even on solid works his position was always in (0,0,0) so normally I should see it.

Also thank you in advance for taking of your time to look at my problem.

Additional Information

Kicad version: 9.0
OS: Ubuntu 24.04

2

Edited your title, fingerprint → footprint.

Also 9.0 is not enough, you should show all three numbers, e.g. 9.0.2, which is what you should upgrade to at this time. Don’t think this affects your problem but it’s always recommended to upgrade your version to the last patch level, 2 in this case.

3

Do you have SMD Models set to show ?

image
image348×563 14.8 KB